Rolls RA53B
5 Channel Headphone Amplifier

This five-channel headphone/earphone distribution amplifier offers a variety of input options, giving you four master mix inputs. Four separate mixes can also be monitored using the main inputs and the three Insert jacks on Channels 1, 2, and 3. 

ART HEADAMP4
4 Channel Headphone Amp

Feed your headphones. The ART HeadAmp4 four-channel stereo headphone amplifier offers 1/8" and 1/4" I/O as well as lower noise, lower distortion and more output in a stackable metal case. It lets you easily add additional headphone outputs to any mixer, computer audio interface, workstation, iPod,…

Radio Systems DA4X4B
Distribution Amplifier

Radio Systems’ DA-4x4b may be the best DA ever made. We've lowered the noise to a whisper at 102 dB below +4 dBm out with an internal toroidal transformer that dramatically reduces internal electrical interference fields. Distortion in the DA-4x4b is so low that it is hard to measure as a…

Rolls RA163
XLR Distribution Amp 8 CH Mono/4 CH Stero

The Rolls RA163 is an eight channel mono, or four channel stereo distribution amplifier designed for the contractor / install market. The outputs are designed to drive high-level balanced lines in a sound distribution system. The XLR jacks on the rear panel are for input and output, and each output…


Presonus HP4
4 Channel Headphone Amp

The HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package - at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per…

SAMSON SERVO120A
120 Watt Power Amplifier

The Sampson Servo 120a stereo power amplifier delivers 60 watts of power per channel into 4 ohms or 120 watts into 8 ohms in bridge mode. Its intuitive front panel offers controls and displays that include a power switch, independent left and right-channel input level controls, 10-segment LED…

Rolls HA43PRO
4 Channel Headphone Amplifier

Now that scientists have definitively proved that two heads are better than one, just think of the awesome power you can harness with the HA43 Pro headphone amp!This four-channel stereo headphone monitoring device is a no-brainer for any recording studio, listening room, or monitoring station. Each…

Henry Engineering TalentPod
Mic & Headphone Controller

With Talent Pods, each announcer can control his own mic and headphones. Need to mix Local and Return audio into headphones? Need a different mix for each announcer? Need to give off-air cues to just the “color guy”? No problem! Talent Pod does it all, without DAs and complicated…

Henry Engineering SportsPod
Mic & Headphone Controller, with Talkback

The Sports Pod is an announcer’s mic/headphone controller and intercom system for use by talent at a remote broadcast. It is ideal for use at sporting events, on-location broadcasts, or in any studio. Sports Pod is similar to Henry Engineering’s Talent Pod, but with three additional…

Galaxy Audio JIBS
4-Way Headphone/Monitor Splitter

Galaxy's Jack-in-the-Box (model #JIBS) is a 4-way audio splitter. It splits a single monitor feed to as many as four monitors, or a single headphone feed to four headphones. Balanced 1/4" TRS inputs and outputs provide maximum isolation.

 

Behringer HA4700
4-Channel Headphone Amplifier

The 4-channel BEHRINGER HA4700 features superior performance, routing and mixing functions to accommodate the most discerning set of ears. When a conditioned mix has to reach multiple listeners, the HA4700 delivers in style.The HA4700 offers 4 high-power amplifiers that can drive loads down to 8…

RDL RU-MDL4
1X4 Mic/Line Distribution Amp

The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides…

Henry Engineering GuestPod
Satellite POD for Multiphones II

The Henry Engineering Multiphones is a multi-user distributed headphone system for broadcast studio, professional audio and other applications. It provides independent stereo headphone listening facilities for up to 12 users. The Multiphones system consists of the master unit and up to 12 satellite…

Radix DA1600
Distribution Amplifier

The Radix DA1600 is a heavy-duty distribution amp with 8 stereo or 16 mono balanced outputs. Front panel level control and selectable pads accommodate a wide range of input levels. Features: removable, plug-in connectors that allow wiring changes to be made quickly and effortlessly with the…

ART SLA1
100 Watt Studio Linear Amplifier

The SLA1 Studio Linear Amplifier is a robust yet compact power amplifier and has been designed and engineered to provide clean, quiet power with ultra-low noise and distortion. The SLA1 is rated at 100 watts rms/channel into 8 ohms, and has an input impedance of 22k ohm unbalanced (44k ohm…

Whirlwind HBUC
Headphone Audio Control Box

This compact, passive headphone control box mounts under a table or counter and provides headphone volume control for broadcast applications, recording studios, language labs, and anywhere space is at a premium. It sports two 1/4" inputs for input / through connections, and boasts a rounded edge…

Henry Engineering USDA 2X4
2X4 Distribution/Summing Amplifier

U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or mono. There are 2 inputs (1 stereo pair) and 4 outputs (2 stereo pairs). Front panel…

Henry Engineering MultiPhones-II
Multi-User Headphone Distribution System

The MultiPhones II system, consisting of a Master unit and up to 12 satellite Guest Pods interconnected with standard CAT5 cabling, offers independent stereo headphone listening facilities with Zoned Talkback for up to 12 users. Its Master unit distributes Program audio to all Guest Pods via three…

RDL ST-DA3
1X3 Mono Distribution Amplifier

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving up to three high or low impedance, balanced or unbalanced loads. The ST-DA3's wideband circuitry produces the…

Crown XLS1002
2CH 350W Power Amplifier

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom…

JK Audio RemoteAmp Two
Stereo Headphone Amplifier

JK Audio combines professional audio electronics in a rugged new belt pack design.RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources.…

ART HEADAMP4PRO
Four Channel Headphone Amp w/ selectable talkback/monitoring

The ART HeadAmp4Pro could be the most fully featured ultra compact headphone amplifier in its price point on the market today. Packing as many features as possible into the small format chassis, the HeadAmp4Pro has five stereo headphone outs, each with their own volume control. A separate…

Rane DA216S
2X16 Distribution Amplifier

The Rane DA 216S is a two-input, sixteen-output splitter/distribution amplifier, capable of providing sixteen discrete balanced outputs from one or two balanced mic-level or line-level inputs. The level of each output is individually adjusted via one of the sixteen screwdriver Output Level controls…

Digital Audio Labs 24Ch Input Module
Livemix Audio 24CH Input Module

The Livemix AD-24 is a single rack mounted unit that converts audio from your mixer, snake, or other line level source into studio quality digital audio streams. This audio gets sent to the Livemix MIX-16 through a single CAT5 cable. Front panel controls and LED VU meters make the Livemix AD-24…

 

Broadcast Tools 2X6DA PLUS
2X6 Stereo Distribution Amp

The Broadcast TOOLS 2x6 DA Plus stereo distribution amplifier is equipped with a stereo line level high Z input, which accepts a balanced or unbalanced source with six active balanced low Z output amplifiers. Each output amplifier may be paired for stereo or each output pair may be summed for…

 

Inovonics INOmini 300
AES Distribution Amp Plus

Need more than 1 INOmini? Maybe 3? Inovonics Rack Pack, is your solution. Rack any 3 INOmini products (or 2 610 Internet Radio Monitors) and save! Contact BSW sales for more details!The INOmini 300 is a compact, DSP-based 1x3 DA specifically for AES digital audio. It reads and displays…

 

SAMSON Rolls RA62C
6-Channel Headphone Amplifier

The Rolls RA62C headphone/earphone amplifier features 6 stereo channels (both 1/4" and 3.5 mm) with independent output controls that can be used simultaneously. It can put out a vigorous 600 mW per jack. It boasts XLR, 1/4", and RCA Main Inputs, as well as six stereo insert jacks for separate use…

 

 RDL ST-GCA3
Audio Gain Control Amplifier

This indispensable device constantly adjusts for changes in input levels, bringing up low levels and reducing gain for high levels to continuously maintain the correct output of your system. It features two switch-selectable modes to give you flexible control of most any sound level problem. Its…

Presonus HP4
4 Channel Headphone Amp

The HP4 from PreSonus answers the need for a headphone distribution amplifier with professional specifications in a small package - at an affordable price. The HP4 features four discrete headphone outputs on the front panel each with its own volume potentiometer and 150mW of amplification per…

 

 


 

 

ATI DA208
Dual 1X4 Distribution Amplifier

This dual distribution amplifier offers transparent performance with serious RF protection. It boasts two inputs, each driving four individually adjustable, active balanced outputs. You can also parallel inputs for up to 1x16 operation, and drive everything from balanced 600-ohm lines to Hi-Z IHF…

ATI DA208S
Dual 1x4 Distribution Amplifier Signal-Present Indicators

Similar to the ATI DA208, this model adds signal-present indicators.This dual distribution amplifier offers transparent performance with serious RF protection. It boasts two inputs, each driving four individually adjustable, active balanced outputs. You can also parallel inputs for up to 1x16…

Presonus HP60
Headphone Mixing System

Feed your heads. All six of them. This is the most flexible and advanced headphone amplifier system around, delivering loud and clear headphone mixes for a variety of applications. Loaded with six independent amplifiers, it features dual stereo inputs as well as external input for each channel to…

RDL RU-MLD4
1X4 Mic/Line Distribution Amp

The RU-MLD4 is a four channel audio distribution amplifier. The input and all four outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. The input accepts either a balanced microphone or line level signal. Each of the four outputs provides…

ATI DDA106XLR
1X6, XLR Distribution Amplifier

This AES/EBU digital audio distribution amplifier offers a single input configuration, with levels and connectors optimized for use with balanced XLR 110 ohm cable. Its adjustable input equalization and multiple regenerated independent AES/EBU low jitter output make it ideal for the most demanding…

QSC GX3
425 Watt @ 4 OHM Power Amp

The QSC GX3 power amplifier delivers maximum performance and portability at a great price, offering easy hookup and adjustments, excellent audio quality and solid reliability. The GX3 is ideal for speakers in the 300-watt (Program) range.The QSC GX3 boasts premium toroidal power transformers for…

ART SLA1
100 Watt Studio Linear Amplifier

The SLA1 Studio Linear Amplifier is a robust yet compact power amplifier and has been designed and engineered to provide clean, quiet power with ultra-low noise and distortion. The SLA1 is rated at 100 watts rms/channel into 8 ohms, and has an input impedance of 22k ohm unbalanced (44k ohm…

ART SLA2
200 Watt Studio Linear Amplifier

The latest amplifier from ART doubles the power of their popular 100-watt SLA 1, still in a compact single rackspace unit. The SLA-2 is a studio linear power amp that delivers 200 watts of clean, clear power, and will help reproduce your mixes with near pinpoint accuracy, all inside a single…

ATI DA412
1X3 Quad Distribution Amplifier

This quad distribution amp offers transparent sound and maximum versatility, giving you four inputs that each drive a master input gain adjustment and three individual output level trimmers to ground sensing active balanced outputs. You can parallel the inputs with internal jumper plugs for up to 1…

Rolls RA102
10-Ch Expandable Headphone Amplifier

The Rolls RA102 is a 10-channel professional headphone amplifier. Designed with volume controls and 1/8" headphone outputs on the front of the unit, along with 1/4" headphone outputs on the back of the RA102 for each channel, the RA102 has the connections for any professional application. Its join…

Rane HC6S
6 Channel Headphone Amplifier,Switchable Voltage

This headphone console features six stereo headphone amplifiers that can deliver standard distribution or work as separate amplifiers (or any combination of both) for customized headphone mixes.Its Master balanced/unbalanced stereo inputs can be used to drive any or all of the 6 stereo headphone…

Presonus HP2
Battery-Powered Stereo Headphone Amplifier

Like other products in the popular HP series, the affordable, stereo HP2 headphone amplifier delivers loud, clean, clear sound, and roadworthy build quality, making it a great choice for wired IEM and headphone users alike. PreSonus HP-series headphone amplifiers have long been popular for their…

RDL RU-ADA4D
2X4 Stereo 1X8 Mono Distribution Amplifier

The RU-ADA4D is a four channel stereo audio distribution amplifier with input and output gain adjustments and input level metering. The module may be operated in mono to provide up to eight distributed mono signals. The inputs and outputs are connected on rear-panel detachable terminal blocks. Each…

ATI L200XLR
2 CH Line Amplifier +22dBm – XLR I/O

The NANOAMP L200 Dual Line/Buffer Amplifier is an inexpensive high performance amplifier, which is ideal as a gain block, attenuator, impedance converter and signal splitter. It can also be configured as a stereo to mono summing amplifier with the addition of an internal jumper. The inputs provide…

Henry Engineering USDA 2X4
2X4 Distribution/Summing Amplifier

U.S.D.A. (Utility Summing & Distribution Amplifier) is a unique 2x4 mini-DA that can be used to combine or split audio signals for distribution. It can be used as a 1x4 or 2x4 DA in stereo or mono. There are 2 inputs (1 stereo pair) and 4 outputs (2 stereo pairs). Front panel…

Studio Items PHCP-WB
Passive Headphone Control Panel with Wood Base and Level Control

The Studio Items PHCP-WB Passive Headphone Control Panel offers a resistive bridging input, audio taper level control and a 1/4" headphone jack. Dimensions are 6.75"W x 3.5"H.

Shure SHA900
Portable Listening Amplifier

The premium, standalone SHA900 Portable Listening Amplifier features a USB digital-to-analog-converter (DAC) that converts analog or digital audio from portable digital audio sources and computers. For use with high-quality headphones and earphones, the SHA900 features a 24 bit/ 96 kHz conversion…

ESE ES-208
Video 1X12 Distribution Amplifier

The ES-208 provides a loop-thru input and 12 isolated outputs, all accessible via BNC connectors. Screwdriver-adjustable Gain and Equalization controls are provided on the front of the case. Up to 1000 feet of cable may be compensated by adjusting the EQ trimmer. The Gain control provides an…

Crown XTI6002
3000W @ 2 Ohms Power Amplifier

The Crown XTi 6002 power amplifier boasts stunning sound quality, providing 1,200 watts per channel into 8 ohms and delivering up to 6,000 watts power (4 ohm mono bridge).With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools,…

ESE DV207
3G/HD/SD Reclocking 1X4 DA

The DV-207 is an SDI digital video (3G, HD & SD) 1 x 4 Distribution Amplifier. The unit features high-performance & low-cost and is able to distribute 3Gb/s, 1.5Gb/s & 270Mb/s data rates. The DV-207 automatically detects the data rate and then re-clocks and equalizes the signal. The…

Crown XLS2002
2CH 650W Power Amplifier

The next generation of XLS got a makeover with a sleek new look, a LCD display that is three times larger, and more DSP with higher capabilities. Like its predecessor, the new XLS is ultra-efficient with Crown’s patented DriveCore technology and can drive 2400W at 4Ω bridged with tons of headroom…

Ashly SRA2150
2 X 80W @ 8 OHM Power Amp

Keep the volume (and your budget) right where it needs to be with this high-efficiency amplifier.This two-channel stereo power amp is ideal for installations with modest power requirements. Providing 80W per channel at 8 ohms, it fits into 1RU for carefree compact convenience. Designed to drive 4-…

Drawmer DA6
DA: 1 stereo XLR in /6 stereo XLR out

The Drawmer DA-6 is a 6-channel stereo (or 12-channel mono) distribution amplifier featuring XLR balanced inputs and outputs.The stereo input features individual left/right level controls with LED bargraph metering to enable the correct balancing of stereo material or two mono signals. Each of the…

TI L1000-1
2 CH Line Amplifier +24dBm Transformer Output – Barrier Strip I/O

The L1000 is the ideal product to upgrade a low output console, drive phone lines, boost inputs, cancel hum, interface Hi-impedance outputs to balanced lines, compensate for line loss, sum L+R, check phase and drive meters and headphones. The Dual Line Amplifier L1000-1 has balanced, bridging…

 


 

 

ART HEADAMP6PRO
Professional Headphone Amplifier

Six separate custom headphone mixes!The HeadAmp6 Pro is a six-channel 1U rack mountable stereo headphone amplifier with an auxiliary mixer that can deliver six custom headphone mixes. Each channel features level, balance, and separate bass and treble cut and boost rotary controls, with the balance…

 

Drawmer DL241XLR
Compressor, auto/man w/gate/limiter, XLR

The Drawmer DL241 Dual Channel Auto-Compressor boasts a sophisticated design that offers a smooth, transparent and warm sonic performance.Drawmer's unique Programmed Adaptive Expansion circuitry gives you effective single control operation, producing a fast smooth response and eliminating chatter…

 

Digital Audio Labs MIX-16 Livemix Central Mixer
Livemix 16 Mix Central Mixer Distributor Module

The single rack space Livemix MIX-16 central mixer distributes power and audio to connected personal mixers. The MIX-16 provides up to 16 mixes when used with 8 CS-DUO dual mix personal mixers.Main Features:• 24 channel digital input • 24-bit digital mixing & processing

 

AEQ DA-26
1X12, 2x6 Distribution Amp

This compact (1RU) rack-mountable analog audio distribution amplifier feeds one mono input to 12 mono outputs or two stereo inputs to six stereo outputs. For ultimate flexibility, it offers independent gain control for each output. All inputs and outputs are transformer balanced for greater system…

 

Yamaha P5000S
Dual Channel Power AMP - 500 W/Channel

The Yamaha P-Series Power Amplifiers deliver a robust amount of professional-quality power in a wide range of configurations designed to suit most any need. The P5000S provides 50W per channel, 1400W bridged, into 8 ohms. You also get extremely efficient operation with Yamaha's exclusive EEEngine…

 

TI SUM100-RCA
2 CH to 1 CH Summing Amplifier with XLR and RCA I/O

The SUM100 Summing Amplifier is an inexpensive, high performance amplifier that is designed as a line level stereo to mono summing amplifier. It is also useful as a gain block, and as an impedance converter and summing for IHF (RCA type) signals. The inputs provide balanced 40Kohm bridging…

 

ATI DA206
1X3 Dual Distribution Amplifier

This dual distribution amplifier offers two 1x3 channels with balanced inputs and +24dBm outputs. A master gain adjustment for each channel controls all three outputs together to adjust for varying inputs while individual trimmers for each output let you make adjustments over a 20dB range to…

 

ATI DA416
Quad 1x4 Distribution Amplifier

The DA416 is a quad 1x4 distribution amplifier. Outputs are active balanced and individually adjustable (transformer-out versions available); inputs can be paralleled on rear connectors for 1x8, 2x8 or 1x16 operation; barrier block input and output connectors.

 

ATI DA1008-2
1X8 Distribution Amplifier, metered, +26dBm Output

With its higher power output and lower noise, the updated DA1008-2 is ideal for every application and every budget. With the DA1008-2, you’ll avoid RF and hum pick-up problems from noisy, lossy splitters, eliminate hard-to-find shorts from multiple taps on critical lines, boost low console outputs,…

   

RDL FP-PA20
Audio Power Amp 70V and 100V Output

The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. Both a 70 V…

   

Broadcast Tools AHR-1 Plus
Active Headphone Remote, used with FlexPhones Master

The Active Headphone Remote AHR1PLUS for the Broadcast Tools Flexphones System contains a stereo amplifier designed to work with any combination of high efficiency headphones with impedances between 24 and 600 ohms. The AHR1PLUS version can be used as an individual headphone listening station with…

   

Drawmer DS404
Gate Switchable hard or Soft 4ch 1U

The Drawmer DS404 Quad Noise Gate is ideally suited for use over a wide range of input signals, ranging from drums and other percussive instruments to vocals, pianos and even complete mixes.The DS404's variable low-pass and high-pass filters deliver precise frequency selective gating. The unit can…

 

Yamaha PC501N
925 Watts/Channel Power AMP - Networkable

High power, exceptional clarity, and cutting-edge networking capability – Yamaha's PC-1N series is the new standard of professional power amplifiers. The PC9501N delivers 925W/channel of stereo power into 8 ohms (2800W bridged). With excellent linear power characteristics and refined hardware…

 

Broadcast Tools AESDA2X4
Two Input AES/EBU Distribution Amplifier

The AES DA 2×4, eight output two-input AES/EBU distribution amplifier is ideal for distributing AES/EBU signals or word clock at sample rates of up to 96kHz. It can be configured for 2×4 operation, acting as two separate one input, four output DAs, or for 1×8 operation acting as a one input eight…

 

Digital Audio Labs Livemix Dante Input Module
Livemix Dante Option card for MIX-16

The LM-DANTE-EXP option card for the MIX-16 is for users with digital audio on a Dante network. Once your audio is on the network, use the Livemix CS-DUO to configure the network for use with the Livemix system.Main Features:• Option card for MIX-16 (below) • Easy configuration via…

 

 


 

 

QSC RMX4050A
3RU 2-Ch 1300 W @ 4 ohms Power Amp

The RMXa Series amplifiers from QSC offer true professional-quality performance at an affordable price. Three 2-rackspace models range in power from 430 to 1200 watts per channel at 2 ohms. Two 3-rackspace models provide 2000 to 2500 watts per channel at 2 ohms. All five models feature a compact…

 

Henry Engineering MultiPhones-II
Multi-User Headphone Distribution System

The MultiPhones II system, consisting of a Master unit and up to 12 satellite Guest Pods interconnected with standard CAT5 cabling, offers independent stereo headphone listening facilities with Zoned Talkback for up to 12 users. Its Master unit distributes Program audio to all Guest Pods via three…

 

RDL RU-PA518
Audio Power Amplifier, 5W Stereo, 18W Mono

The RU-PA518 from Radio Design Labs is a versatile audio amplifier featuring advanced circuitry with accessible, user-friendly controls and displays. It offers two modes of operation: stereo and bridged mono. Depending on the mode of operation, the RU-PA518 can deliver from 5 to more than 18 watts…

 

ATI L200XLR
2 CH Line Amplifier +22dBm – XLR I/O

The NANOAMP L200 Dual Line/Buffer Amplifier is an inexpensive high performance amplifier, which is ideal as a gain block, attenuator, impedance converter and signal splitter. It can also be configured as a stereo to mono summing amplifier with the addition of an internal jumper. The inputs provide…

 

Yamaha PC2001N
200-Watts/Channel Power AMP - Networkable

High power, exceptional clarity, and cutting-edge networking capability – Yamaha's PC-1N series is the new standard of professional power amplifiers. The PC2001N delivers 200W/channel of stereo power into 8 ohms (600W bridged). With excellent linear power characteristics and refined hardware…

 

JK Audio RemoteAmp Two
Stereo Headphone Amplifier

JK Audio combines professional audio electronics in a rugged new belt pack design.RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources.…

 

Aphex 120B
1X4 Distribution Amplifier

High Quality Audio Distribution Amp:• 1 input/4 output with output trim adjustments • Transformerless design for wide, flat frequency response • Works for audio or time codeTransformerless High Performance Audio Distribution:Model 120B is a high performance audio distribution amplifier with a…

 

Fostex HP-P1
Portable Headphone Amplifier

The Fostex HP-P1 is an innovative portable headphone amplifier for the iPod/iPhone that connects via the 30-pin dock connector. Featuring a high quality 32-bit Digital/Analog Converter (DAC) and state of the art analog circuitry, the HP-P1 offers exceptional sonic performance with superb clarity…

 

Broadcast Tools HR1-MPXLR
Mounting Plate for HR1 with XLRS

Mounting panel accessory for the AHR1 (shown in photo) with XLR connector cut-out. Note: XLR connector not included.

In Stock

 

RDL ST-PA6
6 Watt Utility Power Amplifier

The ST-PA6 represents the second generation of RDLs breakthrough in the traditional power vs. size ratio. Present technology permits features and performance at the most economical cost ever. The ST-PA6 offers 6 watts of power for a price you would expect to pay for 3 watts. The ST-PA6 features two…

 

Rolls PA202
Stereo 20w Class D Amplifier

The Rolls PA202 is a compact class D amplifier offering 20 watts per channel stereo and 40 watts when in bridge/mono mode. The class D low heat design gives the PA202 the ability to be mounted in very tight applications. It will work great in ceilings by projectors, or anywhere small and heat-free…

   

ATI DA103
1-In/3-Out Distribution Amplifier

This line level distribution amp features one line level input and three independent +22dBm servo balanced outputs in a compact 1/3 RU enclosure. Offering phantom power, it accepts input of either balanced or unbalanced audio at -20, -10 or +4dBu nominal and provides balanced or unbalanced output…

   

ESE ES217
1 x 4 Audio DA

The ES-217 & ES-218 (1x4) and the ES-245 & ES-246 (Quad 1x6) are Audio Distribution Amplifiers that accept a balanced or unbalanced audio signal and produce exact copies of that signal. The outputs are isolated and have recessed Gain controls. These units are the “Audio…

   

QSC PLX3102
600 Watt @ 8 OHM Power Amp

Designed to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required, the PLX3102 delivers up to 3100 W of power and features built-in subwoofer processing, filter switches, and front panel indications of bridge mono…

   

RDL RU-SH1
Stereo Headphone Amp- Rack-up Series, Level Control

The RU-SH1 is a dual channel headphone amplifier that can drive high or low impedance headsets in stereo or mono. If features balanced/unbalanced left and right inputs that accept operating levels between -20 dBV and +20 dBu. It mounts in RACK-UP series rack mounts or in various RDL mounting…

 

ATI ADA-208-XLR
Dual 1x4 Low Noise Analog Distribution Amplifier

The ADA208-XLR give you uncompromised outputs, > 90dB EIN audio performance at a reasonable price, with two inputs, each input driving four individually adjustable, active balanced outputs. Need more outputs? Just parallel inputs for up to 1x16 operation. Drive everything from balanced 600 ohm…

 

Rolls MA2152
Stereo 100 Watt Mixer/Amplifier 2U

The Rolls MA2152 is a two rackspace mixer/amplifier designed for restaurants, schools, churches, clubs, etc. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players, and video players with up to two microphones. Priority talkover is provided on…

 

Aviom D800-DANTE
A-Net Distributor, with A-Net Bridge input and Dante interface

Aviom’s series of D800 A-Net® Distributors provides support for parallel connections of up to eight Pro16® devices, including the A360, A-16II, and A-16R Personal Mixers, along with additional network connectivity options. The standard D800 includes a Pro16e™ A-Net input,…

 

QSC CMX300VA
2RU 2-Ch 300 W @ 4 ohms Power Amp

The New CMXa Series is an economical and rugged power amplifier designed to meet the needs of system integrators. It is based uponthe proven, rock-solid, reliable performance found in the award winning RMX Series. The CMXa feature sets are designed for wide-ranging application in facilities such as…

 

QSC CMX2000VA
3RU 2-Ch 2000 W @ 4 ohms Power Amp

The New CMXa Series is an economical and rugged power amplifier designed to meet the needs of system integrators. It is based uponthe proven, rock-solid, reliable performance found in the award winning RMX Series. The CMXa feature sets are designed for wide-ranging application in facilities such as…

 

Ashly SRA2075
2 X 40W @ 8 OHM Power Amp

It might speak softly but it carries a big kick! This two-channel stereo power amp is ideal for installations with modest power requirements. Providing 40W per channel at 8 ohms, it fits into 1RU for carefree compact convenience. Designed to drive 4- and 8-ohm loads, it features outstanding sound…

   

Rolls RA200
Stereo Power Amplifier

The Rolls RA200 power amplifier features two 100 watt RMS - 4 ohm outputs, a bridging switch, MOSFET drivers in a voltage and current gain circuit, one second power-up delay, and LED power output meters. The unit is housed in a painted steel chassis and includes a special high performance…

   

Studio Items AJP-WB
Active Headphone Panel With Wood Base and No Level Control

The Studio Items AJP-WB Active Jack Panel offers a balanced Hi Z input with parallel input RJ-45 connector, a fixed level set and stereo 1/2-watt output. It sports a blue LED power indicator and comes with an under table mount (6.75"W x 3.5"H). It requires bi-polar 15-volt power.

   

ART SLA4
4-channel, 400W Power Amplifier

Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.The ART SLA-4 is a true four-channel amplifier in a single…

   

RDL ST-PA2
2 Watt Utility Power Amplifier

The ST-PA2 features a single, unbalanced audio input, a gain control, and two outputs. The first output is designed to deliver a clean 2 watts RMS into an 8 Ω speaker. The second output is intended to drive 600 Ω transformers, typically on equipment inputs. This makes the ST-PA2…

 

ATI DDA212-N
Dual 1X6 Digital DA, 32-192kHz, Re-clocking- Built in Webserver

DaySequerra’s flagship digital audio DA, the DDA212N, is the world’s first DDA to have a built-in webserver for remote control from anywhere on a studio’s network. The DDA212N features state-of-the-art jitter < 300 picoseconds and ultra-low distortion sample rate converters covering 32 to 192KHz…

 

Yamaha P2500S
Dual Channel Power AMP - 250W/Channel

The Yamaha P-Series Power Amplifiers deliver a robust amount of professional-quality power in a wide range of configurations designed to suit most any need. The P2500S provides 250W per channel, 620W bridged, into 8 ohms. You also get extremely efficient operation with Yamaha's exclusive EEEngine…

 

QSC CMX500VA
2RU 2-Ch 500 W @ 4 ohms Power Amp

The New CMXa Series is an economical and rugged power amplifier designed to meet the needs of system integrators. It is based uponthe proven, rock-solid, reliable performance found in the award winning RMX Series. The CMXa feature sets are designed for wide-ranging application in facilities such as…

 

Crown XTI4002
1600W @ 2 Ohms Power Amplifier

The Crown XTi 4002 power amplifier boasts stunning sound quality, providing 650 watts per channel into 8 ohms and delivering up to 3,200 watts power (4 ohm mono bridge).With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools,…

 

RDL ST-SH2
Stereo Headphone Amplifier

The ST-SH2 is used in applications requiring headphones of any impedance to be driven from consumer or professional audio sources. For fixed level installations not requiring user volume control, the ST-SH2 is wired to the audio source and to a headphone jack. Frequently, it is desirable to mount a…

 

Whirlwind PA1
Personal Headphone Amplifier

The Whirlwind PA-1 is a high-quality, portable stereo headphone amp. It accepts both balanced and unbalanced stereo line level signals through paralleled XLR and 1/4 TRS inputs. A mono/stereo switch allows selection of either stereo or mono operation. In mono mode, two separate inputs can be mixed…

 

QSC RMX850A
2RU 2-Ch 280W @ 4 ohms Power Amp

The RMXa Series amplifiers from QSC offer true professional-quality performance at an affordable price. Three 2-rackspace models range in power from 430 to 1200 watts per channel at 2 ohms. Two 3-rackspace models provide 2000 to 2500 watts per channel at 2 ohms. All five models feature a compact…

 

ATI DMA103
Mic Distribution Amplifier

The DMA103 1x3 audio distribution amplifier accepts a microphone level input signal and provides either line or microphone level outputs to drive balanced or unbalanced lines. The DMA103 provides up to 80dB gain and contains internal DIPswitch settings for mics of various sensitivities. The Master…