Rolls BUZZOFF
Hum Eliminator (HE18)

The Buzz Off is a 2-channel audio hum and buzz remover. Everyone knows how annoying it is to have 60 cycle hum in your sound. Now you can eliminate virtually all ground hum and buzz by simply inserting the Buzz Off into the audio path. Plus, the unit will convert an unbalanced signal into a…

 

Broadcast Tools ACS8.2Plus
8X2 Stereo Audio Control, Euroblock Connectors

The ACS 8.2 Plus cleanly provides matrix audio switching of 8 stereo inputs to 2 stereo plus 2 mono outputs. You can assign any or all inputs to any or all outputs, with any input assigned to output one having fading capabilities. It features multiple Euroblock connectors for all audio connections,…

 

RDL FP-UBC2
Converter, Unbalanced to Balanced, 2 Channel

The FP-UBC2 is the ideal choice for connectorized conversion from unbalanced to balanced audio. This module features two identical channels. Gold-plated phono jacks are utilized for each unbalanced input channel. Each output is balanced, connected through an XLR jack. A gain trim potentiometer is…

 

Henry Engineering AES DIGISWITCH-3X1
3-Input AES Digital Audio Switcher

AES DigiSwitch 3X1 is a three-input switcher for AES digital audio signals. It accepts up to three AES audio sources, selecting one that is sent to the AES output. It is ideally suited for numerous broadcast and professional audio applications, e.g., as a studio switcher, AES source selector, or…

 

Henry Engineering Superelay
Relay

Superelay is a multi-circuit controller for any application where numerous circuits, including AC line voltage, need to be switched simultaneously. It is ideal for controlling On The Air warning lights and switching the various equipment functions that need to be controlled when, for example, the…

 

Broadcast Tools SS2.1MLR-TERM
Audio Switcher / Router with Terminal Connectors

The SS 2.1 MLR/Term is a transparent two input, dual output switcher/router with mechanical latching relays and Terminal connectors. The SS 2.1 MLR/Term is perfect for all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is…

 

DM Engineering MICRO
Microphone On/Off Switching Module

The DM Engineering Mic Pro On/Off LED-lighted switching module, when combined with the DM Engineering STUDIOSLAVE or Henry Engineering SUPERELAY controller, will give any low-cost production mixing board the microphone switching features of a professional broadcast console! High reliability LED…

 

Studio Hub ADAPTXLRM
Adapt XLR Male to RJ-45

This XLR Male to RJ-45 adapter adapts StudioHub+ cables to source equipment.

 

Broadcast Tools SS 4.4
4x4 Active Stereo Matrix Switcher

The SS 4.4 provides matrix audio switching of four stereo inputs to 4 stereo outputs. Matrix switching allows any/or all inputs to be assigned to any/or all outputs. The SS 4.4 may be controlled via front panel switches, contact closures and/or the multi-drop RS-232 serial port. Additional features…

 

Broadcast Tools Audio Sentinel Web Plus
Web-Enabled Two Channel Stereo Silence Monitor

The Audio Sentinel®Plus>>Web is a web-enabled two channel stereo silence monitor combined with a transparent, integrated stereo audio switcher. Audio Sentinel®Plus>>Web is designed to monitor two balanced or unbalanced independent stereo analog audio sources, one primary, the other…

 

ART PDB
Passive Direct Box

If you are in the business of making sound, sooner or later you will need a good direct box, and the ART PDB is all that and more. The PDB Passive Direct Box is a road-rugged DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer…

 

 

RDL ST-UBA2
Interface Amplifier, Unbalanced to Balanced

The Radio Design Labs STU-BA2 two-channel interface amplifier is used in any application requiring conversion from unbalanced consumer format signals to professional +4 dBu. It may be used to balance audio from CD players, cassette decks, computer sound cards, televisions, and a wide variety of…

 

 

Broadcast Tools Mix-4
4CH Stereo Audio Utility Mixer

The Broadcast Tools Mix-4 is a four channel stereo audio utility mixer ideally suited for the typical broadcast studio or any similar applications. It features four stereo line level high Z mixing inputs, which accept balanced or unbalanced stereo sources. Each input is equipped with a high quality…

 

Henry Engineering Matchbox HD
Bi-Directional Interface Amplifier

The Henry Engineering Matchbox-HD bi-directional stereo level and impedance interface quickly and easily connects consumer gear to professional equipment, eliminating the hum, buzz, and distortion caused by mismatched levels and impedances. It is ideal for devices that play and record, such as DAT…

 

DM Engineering AUDIOPOD
Audio-Pod without Pre-Amp

The AudioPod from DM Engineering is a microphone On-Off controller with stereo headphone amplifier. It is the ideal solution for remote broadcasts, talk studio applications, or whenever you just need from one to four mic/headphone stations. Choose from two AudioPod models (with or without a…

 

 

DM Engineering AUDIOPODPRE
Audio-Pod w/Pre-Amp

The AudioPod from DM Engineering is a microphone On-Off controller with stereo headphone amplifier. It is the ideal solution for remote broadcasts, talk studio applications, or whenever you just need from one to four mic/headphone stations. Choose from two AudioPod models (with or without a…

 

Broadcast Tools ACS4.1
4+1 Stereo Matrix Switcher

The Broadcast Tools ACS 4.1 provides matrix audio switching of 4 stereo inputs to one stereo output. Matrix switching allows any/or all inputs to be assigned to one output. The ACS 4.1 may be controlled via front panel switches, contact closures, logic and/or the multi-drop RS-232 serial port…

 

STUDIO hub ADAPTXLRM
Adapt XLR Male to RJ-45

This XLR Male to RJ-45 adapter adapts StudioHub+ cables to source equipment.

 

Studio Hub HUB12
12 Channel Break-Out-Box

The Radio Systems' StudioHub+ HUB12 break-out box is specifically engineered to break-out up to 8 stereo output channels and 4 stereo input channels from series 4000, 5000 and 6000 Audio Science professional multi-channel audio cards. Inputs and outputs appear on RJ-45 connectors and conform to the…

 

RDL HR-ADC1
Analog to Digital Converter

The HR-ADC1 is a broadcast quality A/D converter that provides exceptional audio accuracy and clarity with any audio source or style. Superior analog performance fine tuned through audiophile listening practices produces very low distortion (0.0006%), exceedingly low noise (-135 dB) and remarkably…

 

Broadcast Tools SS 16.4
16 Stereo in 4 Stereo Out Switcher

The Broadcast Tools SS 16.4 provides matrix audio switching of 16 stereo inputs to 4 stereo plus 4 monaural outputs. Matrix switching allows any or all inputs to be assigned to any or all outputs. The SS 16.4 may be controlled via front panel switches, contact closures, 5-volt TTL/CMOS logic and/or…

   

Henry Engineering Patchbox-II
Stereo Output Multiplier

The new PatchBox II by Henry Engineering takes a 1/4" TRS L/R stereo source and delivers two balanced XLR, four 1/4" TRS and 6 RCA pairs, for even more outputs from one stereo source! The PatchBox II is a great problem-solver around the studio. Send your mixer's output to outboard processors,…

   

IK Mulmedia IRIG-PRE
XLR mic interface for iPhone iPod Touch iPad and Android

This is perhaps the most important product introduction for musicians and the rest of the civilized world since the iPod and iPad. Now, thanks to the iRig Pre, you can hook your favorite microphone to your iOS device and join the mobile music revolution. Create music any time, anywhere with your…

   

Broadcast Tools GPI-16-PLUS
16 GPI Inputs to Serial/USB Port

The GPI-16 Plus interfaces 16 general purpose logic inputs to users PC COM or USB port. The user may select from two pre-programmed serial formats; the “PIP” GPI format which is used on most of our audio switchers, or the legacy AT-1616 format. Additional features include; Plug-in…

   

ART CLEANBOXPRO
2 Channel Stereo Converter

The ART CLEANBoxPro dual channel level converter provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. It offers stereo level controls to optimize signal levels, and features XLR…

     

Henry Engineering Digitatch 2X6
Digital Distribution Amp /Interface

DigiMatch 2x6 is an AES/EBU-to-SPDIF interface and distribution amplifier for digital audio signals. DigiMatch has two distinct functions: (a) to convert between professional (balanced) AES/EBU and consumer (unbalanced) SPDIF digital audio signals; and (b) to distribute a digital input signal(s) to…

 

Titus 3DRX
AES Digital Audio Switcher

The 3DRX has two stereo digital and one stereo analog input plus a stereo digital output. The 3DRX will automatically switch to the secondary digital input if the primary digital source fails (loss of lock, data error, etc.) and then switch to analog input if the two digital streams fail. Features:…

 

Studio Hub HUB32
32 Channel Mini-Amp Hub

The Radio Systems' StudioHub+ HUB32 offers 32 channels of audio break-outs from rear mini-Amp connectors to front panel RJ-45s in 1 R.U. mount.Each of the 32 Hub channels consists of two 2-pin mini-Amp input connectors in parallel with an RJ-45. Each channel carries a stereo balanced audio pair, or…

 

Rolls MB15B
2-Way Stereo Converter

The Rolls MB15b ProMatch converts consumer level stereo RCA signals to balanced XLR professional line level, and vice versa. One side of the unit has two XLR inputs and stereo RCA outputs. The other side has stereo RCA inputs and two XLR outputs. Each side has stereo level controls, and an LED…

 

Broadcast Tools Audio Sentinel Streaming
Web Enabled Two-Channel Stereo Silence Monitor,Switches W/MP3 Stream.

The AUDIO SENTINEL + STREAMING is a web-enabled two channel stereo silence monitor combined with a transparent, integrated stereo audio switcher, and MP3 streaming codec for confidence monitoring over the internet. AUDIO SENTINEL + STREAMING is designed to monitor two balanced or unbalanced…

   

ART ZDIRECT
Passive Direct Box

The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4" input is converted by the transformer into an…

 

Studiohub ADAPT-KITAIR4
Audio Arts Air4 Console Kit

Adapter and patch cable bundle for Audio Arts Air 4 console.21 - F XLRAdapters4 - M XLR Adapters2 - TRS Adapters4 - Pigtail Adapters2 - Mini Unblanced Adapters28 - CAT5 Patch Cables7'4 - CAT5 Patch Cables10'4 -CAT5 Patch Cables3'

 

Henry Engineering RMA
Rack Mount Adaptor

Rack shelf adaptor for Henry Matchbox, Superelay, and other 1/3-space Henry Engineering units. 2 filler panels are included.

 

DM Engineering STUDIOSLAVE
Relay Switching Device

The STUDIOSLAVE Auxiliary Relay Pack is a microprocessor based switching and control interface for broadcast studio and control rooms where multiple and various isolated outputs are required to operate from one or more control inputs. Input and output connectors are Eurostyle pluggable types, and…

   

Henry Engineering Logiconverter
Control Interface Unit

LogiConverter is a general purpose control interface that eliminates the incompatibility between various audio and video equipment remote control circuits. LogiConverter has 4 opto-isolated inputs that control 4 isolated relay outputs. The unit can be programmed to provide either latched or…

   

ENCO Enstreamer Pro 64GB
Audio Video Decoder and Automated Player - 64GB

Powerful Scheduling and Content Distribution for Broadcasters and System Integrators. enStreamer is a dedicated-hardware solution built on a modified Raspberry Pi platform for broadcast, studio transmitter links, in-store radio, and digital signage applications. Intended to be a primary or a…

 

Broadcast Tools SS2.1MLRBNC
Audio Switcher with BNC Connectors

The Broadcast Tools SS 2.1 MLR/BNC is a transparent, two input, dual output switcher/router with mechanical latching relays and BNC connectors that excels at all types of passive signal switching via front panel switches, contact closures and/or serial RS-232. The switching is accomplished with…

 

Henry Engineering TwinMatch
Interface Amplifier

TwinMatch is a dual-stereo (4-channel) level and impedance converter that interfaces two unbalanced consumer stereo outputs with professional balanced equipment. TwinMatch is ideal for use with a pair of stereo CD players or other "play only" sources. The unit accepts four channels (2 stereo pairs)…

 

Studio Hub ADAPT-PUNCH
RJ45 Pigtail On Solid CAT 5

Pigtail to RJ-45 MALE15ft length

 

DBX PB48
Patchbay, 1/4" TRS-Balanced

The dbx PB48 is a well-built, reliable patchbay that just works, all the time, every time.It's user-configurable for half-normalled or de-normalled, with 48 1/4" points on the front panel, connected to 48 1/4" points on the rear. The PB48 is a rugged, noise-free, versatile patchbay designed to…

 

Cradle Point MBR1200B
Wireless router - 4-port switch - 802.11b/g/n - 2.4 GHz

The Cradlepoint MBR1200B router enables easy-to-install wireless connectivity in small business or remote office locations. Ideal for small businesses, temporary command centers, home offices, recreational vehicles, and mobile networks; the Cradlepoint MBR1200B provides wired Ethernet, and 3G/4G…

 

DM Engineering SILENCESENSESR
Dead Air Detector / Paging System

The DM Engineering Silence Sense Sr. consists of the Silence Sense Jr. integrated with the Pager-Dialer module. Not only will you be notified of silence sense conditions but there is another available alert port for any other condition you want to monitor. All that is needed is a contact closure.…

   

Henry Engineering StereoSwitch-II
Stereo Switcher

StereoSwitch II is a three-input stereo audio switcher. It accepts up to three stereo balanced audio sources, selecting one to be routed to the stereo balanced output. It is ideally suited for numerous broadcast applications, e.g., as a studio switcher, line selector, or for automatic source…

   

Studio Hub ADAPT-TA3
RJ-45 Female to TA3 XLR Female

RJ-45 Female to TA3 XLR Female - 8"Adapts SH+ cables to source equipment

   

Broadcast Tools 16X1
Sixteen Input, Single Output Stereo Switcher/Router

The 16x1 passively switches or routes any one of 16 stereo inputs to one stereo output or vise-versa through gold contact relays. The passive nature of the switching allows for any input level and impedance to be used. Inputs may be balanced or unbalanced, while output levels, impedance,…

   

RDL ST-MA2
Muting Monitor Amplifier

The ST-MA2 is a compact audio monitor amplifier with control inputs to mute or reduce the gain of its output. This module may be used in conjunction with other RDL® modules to configure automatic mixing systems or may be used alone as a single-speaker monitor amplifier. The ST-MA2 is typically…

 

Broadcast Tools LR-5
Audio, AES and AC/DC Circuit Switcher

The LR-5 is a mechanical latching relay with one set of four pole double throw contacts and one set of single pole normally open contacts. The LR-5 may be used to switch all types of audio, AES and AC/DC circuits. Additional features include; a five-volt DC 100ma power supply to power external…

 

Broadcast Tools IO Sentinel 4
Web-based 4 Input/4 Relay Remote Control Interface with email, and logging

The I/O Sentinel 4 is a robust, full-featured; Ethernet based data acquisition device with four optically-isolated status (logic) inputs and four programmable SPST relays. The I/O Sentinel 4 was designed so all of the basic functionality you need is included to monitor and control your site…