Andrew LDF4-50A
1/2" Foam Dielectric Cable, Per Foot

LDF4-50A, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission cable…

 

Andrew HJ8-50B
*3" HELIAX® Standard Air Dielectric Coaxial Cable

HJ8-50B, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 3 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

 

ERI RLA350-NF
*Reducer 50 ohm 3-1/8" to type N Female

Reducer, 50 ohm, 3-1/8-inch to type N female, gas tight with pressure port, includes inner connector and flange hardware kit. Formerly part number 2262.

 

Andrew HJ5-50
7/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ5-50, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 7/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

 

Andrew RLA100-21
1 5/8'' Hardware Kit

1-5/8-inch hardware kit, includes O-ring, silicone lubricant, nuts, bolts, and lock washers for one flange joint. Formerly Part Number 69225-2.

 

Myat 201-010
* Insulator Connector, 1 5/8" Bullet

Anchor insulator connector, 1 5/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 3.5 oz.

 

Andrew AL5NM-PSA
N Male Connector Assembly For AVA5-50

Ease connector attachment issues and ensure excellent RF transmission line performance with the Andrew AL5NM-PSA Type N Male Positive Stop connector for 7/8-inch AL5-50 and AVA5-50 cable. Positive Stop Connectors for HELIAX corrugated coaxial cables require no special tools or torque wrenches,…

 

Andrew FSJ4-50B
1/2" HELIAX® Superflexible Foam Dielectric Cable

FSJ4-50B, HELIAX® Superflexible Foam Coaxial Cable, corrugated copper, 1/2 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

 

Andrew HJ7-50A
1 5/8" HELIAX® Standard Air Dielectric Coaxial Cable

HJ7-50A, HELIAX® Standard Air Dielectric Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacketThe Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well known in the radio broadcast community for supplying high-quality transmission…

 

Andrew LDF4.5-50
5/8" HELIAX® Low Density Foam Coaxial Cable

LDF4.5-50, HELIAX® Low Density Foam Coaxial Cable, corrugated copper, 5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

 

Andrew 19256B
Lace-up Hoisting Grip for 7/8 in coaxial cable

Lace-up Hoisting Grip for 7/8 in coaxial cable, elliptical waveguide 77, and Remote Fiber Feeder™ hybrid cable Dimensions Nominal Size 7/8 in Grip Length, minimum 431.80 mm | 17.00 in Leader Length, minimum 330.20 mm | 13.00…

 

Myat 201-001
* 20' 1 5/8" Rigid Line, Flanged

Flanged line assembly, 1 5/8" 50 ohm, 20' typical. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 28 lbs @ 20 feet.

 

Andrew 24312A
*Hoisting Grip, 1 5/8" Cable

Lace-up Hoisting Grip for 1-5/8 in coaxial cable

 

Andrew AL7E158-PS
1/5/8'' EIA Flange Connector For AVA7-50 HELIAX

1-5/8 in EIA Flange for 1-5/8 in AVA7-50, AL7-50 and LDF7-50 cable General Specifications Interface 1-5/8 in EIA Flange Body Style Straight Brand HELIAX® Mounting Angle Straight …

 

 

Andrew 43211A
*Hangers, 1/2" Standard - Kit Of 10

Cable hangers, 1/2" standard - kit of 10. BSW carries a complete line of quality Andrew broadcast products - call for details.

 

Andrew AVA7-50
1 5/8" HELIAX® Andrew Virtual Air™ Coaxial Cable

AVA7-50, HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, 1-5/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE …

 

Andrew RLA350-150
3 1/8" to 1 5/8" Reducer Adapter

Plate reducer, 50 ohm, 3-1/8-inch to 1-5/8-inch includes two inner connectors. 1-5/8-inch bullet is removable and mates with captivated 1-5/8-inch inner connectors. Formerly Part Number 1861.

 

Andrew H5MB-014
7/8" EIA Flange, Gas Barrier For 7/8"

7/8 in EIA Male Flange with gas barrier for 7/8 in HJ550 air dielectric General Specifications Interface 7/8 in EIA Male Flange Body Style Straight Brand HELIAX® Gas Barrier Yes Mounting …

 

Andrew 241088-1
*Grounding Kit, 1/2" Attached 2 Hole Lug

Standard Grounding Kit for 1/2 in corrugated coaxial cable Dimensions Nominal Size 1/2 in Waveguide Size WR42 | WG20 | R220 | WR51 | WG19 | R180 Bonding Conductor Length 609.6 mm | 24 in Cable Jacketing Removal…

 

Andrew 241088-2
*Grounding Kit, 5/8" And 7/8" Attached 2 Hole Lug

Standard Grounding Kit for 5/8 in and 7/8 in corrugated coaxial cable

 

Andrew 31535
Hoisting Grip 2 1/4" Cable

Lace-up Hoisting Grip for 2-1/4"coaxial cable

 

Myat 301-021
* Elbow, 3 1/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 3 1/8" 50 ohm. Includes anchor insulator connector with anti-splitting device, "O" ring, and hardware kit. Approx. Wt. 8.8 lbs.

 

Myat 201-004-XXX
Line Assembly Flanged (per inch)

*Call BSW for Pricing on per inch!Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

 

Andrew L6PNM-RPC
*N Male Connector for 1-1 1/4" Foam

Type N Male OnePiece™ for 1-1/4 in LDF6-50 cable


 

 

 

Myat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.

 

Andrew 31670-5
*Round Member Adapter Kit, 10 Pieces 5-6"

Andrew round member adapter kit, 10 pieces, 5-6"

 

Andrew 204989-7
Standard Grounding Kit 5"

Standard Grounding Kit for 5 in corrugated coaxial cable

 

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

 

Coax-Seal COAXSEAL
Moisture-Resistant Coax Seal - 60" X 1/2" Roll

Hand-moldable, plastic Coax-Seal seals coax fittings from moisture and corrosion. Made of a plastic material that will quickly and effectively seal all types of coax fittings of all shapes, Coax-Seal stays flexible for years, thus insuring moisture-proof connections and insuring long coax life. It…

 

Andrew SEC-358
* 5/8" Cable Entry Boot 4" (102 mm)

The Andrew SEC-358 is a SnapSeal entry cushion with 3 holes for 5/8-inch corrugated coaxial cable.

 

Myat 201-008
*FIXED FLANGE, 1 5/8" EIA , SOLDER OR WELD

Fixed flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 12 oz.

 

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

 

Andrew 42396A9
*Standard Hanger Kit For 5/8"

Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.

 

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

 

Andrew 26985A
Hoisting Grip for 3" Cable

Lace-up Hoisting Grip for 3 in coaxial cable

   

Andrew 31670-1
*Round Member Adapter Kit, 10 Pieces 1-2"

Andrew round member adapter kit, 10 pieces, 1-2".

   

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

   

Andrew 224363
*Flair Tool For LDF4

Flare Tool for 1/2 in coaxial cable

     

Myat 201-011
* O Ring for 1 5/8" Flange

"O" ring, silicone, for 1 5/8" flange connections.

 

Andrew SEC-378
* 7/8" Cable Entry Boot 4" (102 mm)

The Andrew SEC-378 is a SnapSeal entry cushion with 3 holes for 7/8-inch corrugated coaxial cable.

 

Andrew L12PDF
*7-16 DIN Female for 2-1/4" LDF12-50

7-16 DIN Female for 2-1/4 in LDF12-50 cable

 

 

Myat 201-004
* 20' 1 5/8" Rigid Line, Unflanged

Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

 

Myat 301-008
Fixed Flange, 3-1/8" EIA, Solder or Weld

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

 

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.