Myat 201-021
* Elbow, 1 5/8" 90 Degree, Flanged

Elbow, 90 degree, swivel flanged, reinforced inside and outside, 1 5/8" 50 ohm. Includes anchor insulator connector, "O" ring, and hardware kit. Approx. Wt. 3.3 lbs.

 

Andrew 31670-5
*Round Member Adapter Kit, 10 Pieces 5-6"

Andrew round member adapter kit, 10 pieces, 5-6"

 

Andrew 204989-7
Standard Grounding Kit 5"

Standard Grounding Kit for 5 in corrugated coaxial cable

 

Myat 301-023
90 Degree Elbow Flanged

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

 

Coax-Seal COAXSEAL
Moisture-Resistant Coax Seal - 60" X 1/2" Roll

Hand-moldable, plastic Coax-Seal seals coax fittings from moisture and corrosion. Made of a plastic material that will quickly and effectively seal all types of coax fittings of all shapes, Coax-Seal stays flexible for years, thus insuring moisture-proof connections and insuring long coax life. It…

 

Andrew SEC-358
* 5/8" Cable Entry Boot 4" (102 mm)

The Andrew SEC-358 is a SnapSeal entry cushion with 3 holes for 5/8-inch corrugated coaxial cable.

 

Myat 201-008
*FIXED FLANGE, 1 5/8" EIA , SOLDER OR WELD

Fixed flange, 1 5/8", brass. Can be silver brazed or welded. Includes silver braze insert ring. Approx. Wt. 12 oz.

 

ERI ACX350-10SE-2
*3-1/8-inch, 50 ohm, 90 Degree Miter Elbow

3-1/8-inch, 50 ohm, 90 degree reinforced miter elbow, captivated inner conductor, includes inner connector, “O” ring, silicone grease, and flange hardware kit.

 

Andrew 42396A9
*Standard Hanger Kit For 5/8"

Butterfly Hanger for 5/8 in coaxial cable and elliptical waveguide. BSW carries a complete line of quality Andrew broadcast products - call for details.

 

Andrew 241088-4
*Grounding Kit for 1 5/8" Cable

Standard Grounding Kit for 1-5/8 in corrugated coaxial cable

 

Andrew 26985A
Hoisting Grip for 3" Cable

Lace-up Hoisting Grip for 3 in coaxial cable

   

Andrew 31670-1
*Round Member Adapter Kit, 10 Pieces 1-2"

Andrew round member adapter kit, 10 pieces, 1-2".

   

Myat 301-014
* Flange Adapter, 3 1/8" Clamp Type for Indoor Use

Flange adapter, clamp-type, 3 1/8", for indoor use only, to flange field cut line. Can not be pressurized. Includes hardware kit and line clamp. Approx. Wt. 2.65 lbs.

   

Andrew 224363
*Flair Tool For LDF4

Flare Tool for 1/2 in coaxial cable

     

Myat 201-011
* O Ring for 1 5/8" Flange

"O" ring, silicone, for 1 5/8" flange connections.

 

Andrew SEC-378
* 7/8" Cable Entry Boot 4" (102 mm)

The Andrew SEC-378 is a SnapSeal entry cushion with 3 holes for 7/8-inch corrugated coaxial cable.

 

Andrew L12PDF
*7-16 DIN Female for 2-1/4" LDF12-50

7-16 DIN Female for 2-1/4 in LDF12-50 cable

 

 

Myat 201-004
* 20' 1 5/8" Rigid Line, Unflanged

Unflanged line assembly of customer specified length, 20' typical, 1 5/8" 50 ohm. Includes outer conductor and inner conductor assembly, no connector or hardware. Approx. Wt. 1.25 lbs per foot. Specify length in inches.

 

Myat 301-008
Fixed Flange, 3-1/8" EIA, Solder or Weld

For over 50 years, broadcasters have relied on proven MYAT rigid transmission line systems and components. BSW is a full-line MYAT dealer and we can help you select the right MYAT products for your application. Just call and talk to your knowledgeable sales representative today.The MYAT…

 

Myat 301-010
* Insulator Connector, 3 1/8" Bullet

Anchor insulator connector, 3 1/8" 50 ohm for flanged connections. Includes silver plated connector and electrically compensated PTFE insulator. Approx. Wt. 12 oz.